Accessories

Blackmagic URSA Mini Pro Shim KitSet of 9 shims and baffle tool for making precise changes to the flange focal distance for URSA Mini Pro's EF, PL or B4 mount.

Blackmagic URSA Mini Shoulder Kit For ENG and documentary-style shooting, the Shoulder-Mount Kit designed for the Blackmagic Design URSA Mini provides a shoulder mount for you to comfortably rest the camera on your shoulder for long shooting sessions. Integrated into the shoulder mount are a quick-release compatible with VCT wedge plates, 15mm lightweight rod clamps, and rosettes on either side for mounting handles and other accessories. Also included in the kit is a top handle for low-mode...

Blackmagic URSA Mini Top Handle Built specifically for the Blackmagic URSA Mini and URSA Mini Pro, the top handle is great for low-mode shooting and for carrying the camera when not in use.

Blackmagic URSA VLock Battery PlateThis V-Mount Battery Plate from Blackmagic Design allows you to attach third party V-Mount batteries to your URSA camera. The VLock connects directly to the back of the URSA, avoiding the need for extra cabling. Includes a D-Tap port for accessory power

Blackmagic Power Supply - URSA 12V100WThe URSA Power Supply from Blackmagic Design is a power supply brick with an attached XLR cable. The brick has an open slot for an IEC cable (sold separately).

Blackmagic Cable - DIN 1.0/2.3 to BNC Female - CABLE-DIN/BNCFEMALEThis is a cable that has the DIN 1.0/2.3 connector on one end and BNC female on the other.This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. For example, connecting the Blackmagic Design DeckLink Quad to regular BNC cables.

Blackmagic Cable - DIN 1.0/2.3 to BNC Male Adapter CableThis is a 200mm (7.8") long cable that has the DIN 1.0/2.3 connector on one end and BNC male on the other. This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. For example, connecting the Micro Studio Camera 4K to Video Assist 4K or the front output of URSA Mini to Video Assist.

Blackmagic Cable - Lanc 13.7 inch (350mm)Use the 14" URSA Mini LANC Cable from Blackmagic Design to connect the side handle or an external remote control to the URSA Mini, allowing you to control the camera.

Blackmagic Cable - Lanc 7 inch (180mm)Use the 7" URSA Mini LANC Cable from Blackmagic Design to connect the side handle or an external remote control to the URSA Mini, allowing you to control the camera.

Blackmagic Camera - Lens Cap EF The Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Design Cinema, Production Camera 4K, and URSA Cameras with EF mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera - Lens Cap MFTThe Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Cinema Camera, Blackmagic Pocket Cinema Camera, and Blackmagic Studio Camera 4K or Blackmagic Studio Camera HD with MFT mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera - Lens Cap PLThe Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Production Camera 4K or Blackmagic URSA with PL mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera PCC - BatteryThe Blackmagic Design Pocket Cinema Camera Battery is an EN-EL20 type 7.4V, 800mAh lithium ion rechargeable battery. It features a 50 minute continuous recording time, and it charges in approximately 75 minutes when the camera is off and in approximately two hours when the camera is in use

Blackmagic Camera URSA - Viewfinder EyecupUse this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.

Blackmagic Camera URSA Mini - Mount Screws B4 (6-pack)Use these Blackmagic Design screws to install a B4 lens mount on your URSA Mini camera. The set of six 2mm hex screws can be used as replacements or spares.

Blackmagic Camera URSA Mini - Shoulder Kit Bolts (11-pack)Blackmagic Design offers these Shoulder Kit Bolts as spares or replacements to use with the shoulder kit for your URSA Mini camera. The set consists of eleven threaded bolts (four types total)

Blackmagic Camera URSA Mini - Wing Nut Spares (2-Pack)Blackmagic Design offers these Wing Nuts as spares or replacements to use with various accessories for your URSA Mini camera. The set consists of two wing nuts, each with a washer and spring.

Blackmagic Camera URSA Mini Pro - Mount Screws B4 Use these Blackmagic Design screws to install a B4 lens mount on your URSA Mini Pro camera. The set of 2mm hex screws can be used as replacements or spares.

Blackmagic Power Supply - Pocket Cinema Camera 12V10W The Power Supply for Pocket Cinema Camera from Blackmagic Design is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a 0.7 mm DC jack connector specifically to fit the Pocket Cinema Camera. It takes approximately an hour and fifteen minutes to recharge a battery while the camera is off and approximately two hours when the camera is in use. ...

Blackmagic Power Supply - Pocket Cinema Camera 4k, 6K, 6K G2, 6K Pro - 12V30W The Power Supply for Pocket Cinema Camera 4K, 6K, 6K G2, and 6K Pro, from Blackmagic Design is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a locking connector specifically to fit the Pocket Cinema Camera 4K, 6K, and 6K Pro.