Blackmagic Design

Blackmagic Power Supply - URSA 12V100WThe URSA Power Supply from Blackmagic Design is a power supply brick with an attached XLR cable. The brick has an open slot for an IEC cable (sold separately).

Blackmagic 3G-SDI Arduino ShieldCreate a custom camera control solution with the 3G-SDI Arduino Shield from Blackmagic Design. Working in conjunction with a separately available Arduino controller, the Shield embeds an SDI control signal in the Program return feed that will operate compatible cameras, such as the Blackmagic Studio Camera or URSA Mini with the Studio Camera firmware update. These are the same controls output via an ATEM series switcher.Blackmagic Video Device Embedded Control...

Blackmagic Breakout Cable - 4 Lane PCI Express 2 MeterThe Host Adapter Cable for MultiBridge Pro and Extreme from Blackmagic is used to connect a Multibridge Pro or Multibridge Extreme to its host adapter card. It is 6.6' (2 m) in length.

Blackmagic Adapter - DVI to HDMI (5-pack)The Blackmagic Male DVI to Female HDMI Adapter is designed for the Blackmagic HDLink but can be used for any DV interconnections for to HDMI displays. This allows the HDMI television or video projector to connect to the HDLink or any other DVI output device. Pack of 5 adapters.

Blackmagic Breakout Cable - Intensity ProThe Breakout Cable for Intensity Pro from Blackmagic is a replacement cable for Intensity Pro. It features input and output connection for RCA component video and RCA audio. It also includes an RCA connection for SPDIF/AES output. It is identical to the breakout cable that is included with the Intensity Pro.

Blackmagic Cable - DIN 1.0/2.3 to BNC Female - CABLE-DIN/BNCFEMALEThis is a cable that has the DIN 1.0/2.3 connector on one end and BNC female on the other.This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. For example, connecting the Blackmagic Design DeckLink Quad to regular BNC cables.

Blackmagic Cable - DIN 1.0/2.3 to BNC Male Adapter CableThis is a 200mm (7.8") long cable that has the DIN 1.0/2.3 connector on one end and BNC male on the other. This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. For example, connecting the Micro Studio Camera 4K to Video Assist 4K or the front output of URSA Mini to Video Assist.

Blackmagic Cable - Lanc 13.7 inch (350mm)Use the 14" URSA Mini LANC Cable from Blackmagic Design to connect the side handle or an external remote control to the URSA Mini, allowing you to control the camera.

Blackmagic Cable - Lanc 7 inch (180mm)Use the 7" URSA Mini LANC Cable from Blackmagic Design to connect the side handle or an external remote control to the URSA Mini, allowing you to control the camera.

Blackmagic Camera - Lens Cap EF The Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Design Cinema, Production Camera 4K, and URSA Cameras with EF mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera - Lens Cap MFTThe Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Cinema Camera, Blackmagic Pocket Cinema Camera, and Blackmagic Studio Camera 4K or Blackmagic Studio Camera HD with MFT mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera - Lens Cap PLThe Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Production Camera 4K or Blackmagic URSA with PL mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera PCC - BatteryThe Blackmagic Design Pocket Cinema Camera Battery is an EN-EL20 type 7.4V, 800mAh lithium ion rechargeable battery. It features a 50 minute continuous recording time, and it charges in approximately 75 minutes when the camera is off and in approximately two hours when the camera is in use

Blackmagic Camera URSA - Viewfinder EyecupUse this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.

Blackmagic Camera URSA Mini - Mount Screws B4 (6-pack)Use these Blackmagic Design screws to install a B4 lens mount on your URSA Mini camera. The set of six 2mm hex screws can be used as replacements or spares.

Blackmagic Camera URSA Mini - Shoulder Kit Bolts (11-pack)Blackmagic Design offers these Shoulder Kit Bolts as spares or replacements to use with the shoulder kit for your URSA Mini camera. The set consists of eleven threaded bolts (four types total)

Blackmagic Camera URSA Mini - Wing Nut Spares (2-Pack)Blackmagic Design offers these Wing Nuts as spares or replacements to use with various accessories for your URSA Mini camera. The set consists of two wing nuts, each with a washer and spring.

Blackmagic Camera URSA Mini Pro - Mount Screws B4 Use these Blackmagic Design screws to install a B4 lens mount on your URSA Mini Pro camera. The set of 2mm hex screws can be used as replacements or spares.

Blackmagic Power Supply - 12V30WThe Blackmagic Design 12V Power Supply is used to power select products, including the HyperDeck Studio Recorder, UltraStudio Pro & 3D Capture and Playback devices, ATEM Studio Converter, Blackmagic Cinema Camera 2.5K (EF/MFT models), SmartView Duo and HD Monitors, ATEM Television Studio Production Switcher, SmartScope Duo 4K, and Blackmagic Production Camera 4K. It includes international wall socket adapters for worldwide use. ...

Blackmagic Power Supply for Micro Converters 5V2A The Blackmagic Design BMD-PSUPPLY-5V10WUSBC is a replacement power supply that can be used with any Micro Converter in the series. As with the original unit, this power supply includes socket adapters for international countries and also features a cable tie to prevent the wire from becoming accidentally disconnected.

Blackmagic Power Supply - Mini Converters 12V10WThe Blackmagic Design PSUPPLY-INT12V10W is a replacement power supply that can be used with any Mini Converter in the series as well as the HyperDeck Shuttle. As with the original unit, this power supply includes socket adapters for international countries and also features a cable tie to prevent the wire from becoming accidentally disconnected.