Blackmagic Design

Blackmagic URSA Mini Pro EF MountThe URSA Mini Pro B4 Mount from Blackmagic Design is a replacement mount for use on the URSA Mini Pro. This mount is a spare mount, since the URSA Mini Pro comes with an EF mount installed. The mount incorporates the electronic connections that allow the lens to work with the camera. The included set of shims enables precise flange-distance adjustment when installing this mount on your camera. ...

Blackmagic URSA Mini Pro F MountThe URSA Mini Pro F Mount from Blackmagic Design lets you use your favorite Nikon stills lenses with smooth high precision mechanical iris control. Now you can pair digital film quality with classic Nikon AF-S G and AF-D series lenses.

Blackmagic URSA Mini Pro PL MountThe URSA Mini Pro PL Mount from Blackmagic Design features contact pins for compatibility with Cooke's i/Technology protocol allowing lens information to be saved as metadata and used in software like DaVinci Resolve.The included shim kit enables precise flange-distance adjustment when installing this mount on your camera.

Blackmagic URSA Mini Pro Shim KitSet of 9 shims and baffle tool for making precise changes to the flange focal distance for URSA Mini Pro's EF, PL or B4 mount.

Blackmagic URSA Mini Shoulder Kit For ENG and documentary-style shooting, the Shoulder-Mount Kit designed for the Blackmagic Design URSA Mini provides a shoulder mount for you to comfortably rest the camera on your shoulder for long shooting sessions. Integrated into the shoulder mount are a quick-release compatible with VCT wedge plates, 15mm lightweight rod clamps, and rosettes on either side for mounting handles and other accessories. Also included in the kit is a top handle for low-mode...

Blackmagic URSA Mini Top Handle Built specifically for the Blackmagic URSA Mini and URSA Mini Pro, the top handle is great for low-mode shooting and for carrying the camera when not in use.

Blackmagic URSA VLock Battery PlateThis V-Mount Battery Plate from Blackmagic Design allows you to attach third party V-Mount batteries to your URSA camera. The VLock connects directly to the back of the URSA, avoiding the need for extra cabling. Includes a D-Tap port for accessory power

Blackmagic Adapter - 10 Gigabit Ethernet SFP ModuleAdd a 10 Gigabit Ethernet connection to your Blackmagic Studio Camera, Teranex Converter, ATEM hardware (such as the ATEM Talkback Converter 4K), or any other professional device that supports SFP cages with this Blackmagic Design 10G Ethernet SFP Module.

Blackmagic Breakout Cable - DeckLink ExtremeThe Breakout Cable for Decklink Extreme is a replacement breakout cable that works with the Decklink Extreme video capture card.

Blackmagic Breakout Cable - DeckLink HD Extreme 3The Decklink HD Extreme Breakout Cable from Blackmagic Design is designed to facilitate the input and output of various signal types with your audio-video system. It features a serial connector on one end and (14) different input and output connectors on the other end. Breakout Cable This cable is designed to facilitate the input and output of various signal types with your audio-video system. ...

Blackmagic Breakout Cable - DeckLink HD ProThe Breakout Cable for Decklink Pro is a replacement breakout cable that works with both the Single Link (4:2:2) and Dual Link (4:4:4) Decklink video capture cards.

Blackmagic Universal Videohub Deck Control CableThe Blackmagic Design Remote Cable for Universal Videohubs provides remote control functionality by adding four independent remote control ports to either BNC SDI or optical fiber SDI interfaces.Works with Universal VideohubProvides remote control functionality by adding 4 independent remote control ports to either BNC SDI or optical fiber SDI interfaces

Blackmagic Power Supply - URSA 12V100WThe URSA Power Supply from Blackmagic Design is a power supply brick with an attached XLR cable. The brick has an open slot for an IEC cable (sold separately).

Blackmagic 3G-SDI Arduino ShieldCreate a custom camera control solution with the 3G-SDI Arduino Shield from Blackmagic Design. Working in conjunction with a separately available Arduino controller, the Shield embeds an SDI control signal in the Program return feed that will operate compatible cameras, such as the Blackmagic Studio Camera or URSA Mini with the Studio Camera firmware update. These are the same controls output via an ATEM series switcher.Blackmagic Video Device Embedded Control...

Blackmagic Breakout Cable - 4 Lane PCI Express 2 MeterThe Host Adapter Cable for MultiBridge Pro and Extreme from Blackmagic is used to connect a Multibridge Pro or Multibridge Extreme to its host adapter card. It is 6.6' (2 m) in length.

Blackmagic Adapter - DVI to HDMI (5-pack)The Blackmagic Male DVI to Female HDMI Adapter is designed for the Blackmagic HDLink but can be used for any DV interconnections for to HDMI displays. This allows the HDMI television or video projector to connect to the HDLink or any other DVI output device. Pack of 5 adapters.

Blackmagic Breakout Cable - Intensity ProThe Breakout Cable for Intensity Pro from Blackmagic is a replacement cable for Intensity Pro. It features input and output connection for RCA component video and RCA audio. It also includes an RCA connection for SPDIF/AES output. It is identical to the breakout cable that is included with the Intensity Pro.

Blackmagic Cable - DIN 1.0/2.3 to BNC Female - CABLE-DIN/BNCFEMALEThis is a cable that has the DIN 1.0/2.3 connector on one end and BNC female on the other.This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. For example, connecting the Blackmagic Design DeckLink Quad to regular BNC cables.

Blackmagic Cable - DIN 1.0/2.3 to BNC Male Adapter CableThis is a 200mm (7.8") long cable that has the DIN 1.0/2.3 connector on one end and BNC male on the other. This cable can be used to connect a device with DIN 1.0/2.3 connector to another with a regular BNC cable. For example, connecting the Micro Studio Camera 4K to Video Assist 4K or the front output of URSA Mini to Video Assist.

Blackmagic Cable - Lanc 13.7 inch (350mm)Use the 14" URSA Mini LANC Cable from Blackmagic Design to connect the side handle or an external remote control to the URSA Mini, allowing you to control the camera.

Blackmagic Cable - Lanc 7 inch (180mm)Use the 7" URSA Mini LANC Cable from Blackmagic Design to connect the side handle or an external remote control to the URSA Mini, allowing you to control the camera.

Blackmagic Camera - Lens Cap EF The Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Design Cinema, Production Camera 4K, and URSA Cameras with EF mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera - Lens Cap MFTThe Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Cinema Camera, Blackmagic Pocket Cinema Camera, and Blackmagic Studio Camera 4K or Blackmagic Studio Camera HD with MFT mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera - Lens Cap PLThe Blackmagic Design Body Cap replaces the body caps originally supplied with the Blackmagic Production Camera 4K or Blackmagic URSA with PL mount. It protects the camera sensor and internal electronics from dust and dirt that could enter when a lens is not attached.

Blackmagic Camera PCC - BatteryThe Blackmagic Design Pocket Cinema Camera Battery is an EN-EL20 type 7.4V, 800mAh lithium ion rechargeable battery. It features a 50 minute continuous recording time, and it charges in approximately 75 minutes when the camera is off and in approximately two hours when the camera is in use

Blackmagic Camera URSA - Viewfinder EyecupUse this Rubber Eyecup from Blackmagic Design as a spare or replacement for the URSA Viewfinder eyecup.

Blackmagic Camera URSA Mini - Mount Screws B4 (6-pack)Use these Blackmagic Design screws to install a B4 lens mount on your URSA Mini camera. The set of six 2mm hex screws can be used as replacements or spares.

Blackmagic Camera URSA Mini - Shoulder Kit Bolts (11-pack)Blackmagic Design offers these Shoulder Kit Bolts as spares or replacements to use with the shoulder kit for your URSA Mini camera. The set consists of eleven threaded bolts (four types total)

Blackmagic Camera URSA Mini - Wing Nut Spares (2-Pack)Blackmagic Design offers these Wing Nuts as spares or replacements to use with various accessories for your URSA Mini camera. The set consists of two wing nuts, each with a washer and spring.

Blackmagic Camera URSA Mini Pro - Mount Screws B4 Use these Blackmagic Design screws to install a B4 lens mount on your URSA Mini Pro camera. The set of 2mm hex screws can be used as replacements or spares.

Blackmagic Power Supply - 12V30WThe Blackmagic Design 12V Power Supply is used to power select products, including the HyperDeck Studio Recorder, UltraStudio Pro & 3D Capture and Playback devices, ATEM Studio Converter, Blackmagic Cinema Camera 2.5K (EF/MFT models), SmartView Duo and HD Monitors, ATEM Television Studio Production Switcher, SmartScope Duo 4K, and Blackmagic Production Camera 4K. It includes international wall socket adapters for worldwide use. ...

Blackmagic Power Supply for Micro Converters 5V2A The Blackmagic Design BMD-PSUPPLY-5V10WUSB is a replacement power supply that can be used with any Micro Converter in the series. As with the original unit, this power supply includes socket adapters for international countries and also features a cable tie to prevent the wire from becoming accidentally disconnected.

Blackmagic Power Supply - Mini Converters 12V10WThe Blackmagic Design PSUPPLY-INT12V10W is a replacement power supply that can be used with any Mini Converter in the series as well as the HyperDeck Shuttle. As with the original unit, this power supply includes socket adapters for international countries and also features a cable tie to prevent the wire from becoming accidentally disconnected.

Blackmagic Power Supply - Pocket Cinema Camera 12V10W The Power Supply for Pocket Cinema Camera from Blackmagic Design is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a 0.7 mm DC jack connector specifically to fit the Pocket Cinema Camera. It takes approximately an hour and fifteen minutes to recharge a battery while the camera is off and approximately two hours when the camera is in use. ...

Blackmagic Power Supply - Pocket Cinema Camera 4k, 6K, 6K G2, 6K Pro - 12V30W The Power Supply for Pocket Cinema Camera 4K, 6K, 6K G2, and 6K Pro, from Blackmagic Design is used both to power the camera from AC as well as recharge a battery in the camera. It outputs 12V DC, and features a locking connector specifically to fit the Pocket Cinema Camera 4K, 6K, and 6K Pro.

Blackmagic Power Supply - Videohub 12V150WThe Blackmagic Design PSUPPLY-12V12A is a replacement power supply unit for the Broadcast Videohub router.

Blackmagic Universal Rack Shelf Rack-mount up to three Teranex Mini units or two or three HyperDeck or UltraStudio units side-by-side using this lightweight, 1U Universal Rack Shelf for 19" racks from Blackmagic Design. This shelf is well-suited for road cases as well as equipment racks.

Blackmagic Universal Videohub Power SupplyThe Blackmagic Design Power Supply (800W) is designed to work with universal videohubs and comes with power cards and cables. The 1 rack unit power supply with dual redundant 800 Watt / 12 volt supplies is required for designing a fully loaded router with mixed optical fiber and BNC SDI modules.1 rack unit power supply with dual redundant 800 Watt 12 volt power suppliesDesigned to work with universal videohubIs required for designing a fully loaded...

Teranex Mini Converter - Rack ShelfRack-mount up to three Teranex Mini units side-by-side using this lightweight, 1U Teranex Mini Rack Shelf for 19" racks from Blackmagic Design. This shelf is well-suited for road cases as well as equipment racks.

Replacement Power Supply - Smart Remote 4 30W The Blackmagic Design Ultimatte BMD-PSUPPLY-SR4/30W is a replacement power supply unit for the Ultimatte Smart Remote 4.

Blackmagic Analog to SDI Heavy Duty Mini ConverterMini Converter Heavy Duty Analog to SDI includes everything you need to convert from analog video in HD/SD component, NTSC, PAL or S-Video to SDI video, with the choice to embed SDI audio from balanced AES/EBU or analog audio inputs. Now you can convert analog devices such as Betacam SP, VHS, set top boxes and HDV cameras to SDI video, all in a compact and super tough converter machined from a solid block of aluminum! ...

Blackmagic ATEM 1 M/E Broadcast PanelWhen the software control panel is too limited, the ATEM 1 M/E Broadcast Panel is a professional panel with the highest quality buttons, knobs and controls for the most demanding 24/7 live production environment. The ATEM 1 M/E Broadcast Panel is compact so it fits within a rack width! You get full control of your switcher, including cameras, transitions, keyers, fader, DVE control and more. ATEM 1 M/E Broadcast Panel connects via ethernet and includes a...

The ATEM 2 M/E Broadcast Panel has the power for the most complex live broadcast events and it's perfect when you have the space for a large panel and need all the control at your fingertips. The ATEM 2 M/E Broadcast Panel features an amazing design that not only looks incredible, but perfectly positions all controls just where you need them for the ultimate creativity on complex multi layer live production. The ATEM 2 M/E Broadcast Panel connects via Ethernet and includes loop thru for your...